The following details can be downloaded directly from Teifs in Autocad .DWG format. Simply click on the desired file and you will be prompted by your browser for file saving instructions.
Content | Download | Download Zip |
WeatherTech WRBs Details Book |
||
General Construction
|
DWG | |
General Construction
|
DWG | |
General Construction
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Terminations at Foundations
|
DWG | |
Expansion Joints
|
DWG | |
Expansion Joints
|
DWG | |
Roofs
|
DWG | |
Roofs
|
DWG | |
Roofs
|
DWG | |
Roofs
|
DWG | |
Roofs
|
DWG | |
Penetrations
|
DWG | |
Penetrations
|
DWG | |
Penetrations
|
DWG | |
Transitions to Dissimilar Water-Resistive Barriers
|
DWG | |
Transitions to Dissimilar Water-Resistive Barriers
|
DWG | |
Transitions to Dissimilar Water-Resistive Barriers
|
DWG |
Disclaimer: The design specifications and construction shall comply with all local building codes and standards.
Parex USA installation guidelines are for general information and guidance only and Parex USA specifically disclaims any liabilitY for the use of this design, and for design engineering, or workmanship of any project. The assembly shall be designed to prevent condensation within the assembly. The designer and the user shall provide final drawings and specifications. Products shown other than those manufactured by Parex USA are shown for clarity of the Parex USA product only. Contact the Manufacturer for installation instructions.
Note:
To ensure a continuous air barrier across the building envelope, a continuous air seal should be made at each substrate change, joints/gaps, penetrations and dissimilar material terminations. There must be a consideration of the Designer in the overall wall assembly design. Stucco claddings and any cladding using a mortar bed require the use of a slipsheet installed over the Water-Resistive & Air Barrier Coating to prevent adhesion to the stucco.